Hotfixes 2014

Below you will find a list of hotfixes available for MIKE by DHI 2014 products.

Please note:

  • You may need to install service packs for the software product in question prior to applying the hotfix. 

If you have questions, please contact you local DHI office or mikebydhi@dhigroup.com

MOST RECENTLY UPLOADED:

  • MIKE 11 hotfix 12-12-2016
  • MIKE 11 hotfix 21-06-2016
  • MIKE URBAN hotfix 20-06-2016

Hotfixes for release 2014 (require Service Pack 3 installed)

MIKE 11 hotfix 12-12-2016

This hotfix resolves an issue with NAM Rainfall Runoff model including Snow melting, where the runoff from snow melting is corrected to include dependency of the base coefficient 'T0' in agreement with the formula outlined in MIKE 11 RR reference manual.

9.3 MB
MIKE 11 hotfix 04-07-2016

The hotfix solves a couple of issues:

  • Crash in model simulation when running Rainfall Runoff (RR) as stand-alone simulation
  • Crash during pre-processing when creating river network for few special model setups
  • Error in control strategy number saved to results file during Data assimilation simulations
9.3 MB
MIKE URBAN hotfix 20-06-2016

This hotfix address the issue of the MOUSE engine not creating a warnings file when started with hidden GUI.

4.6 MB
MIKE HYDRO hotfix 10-11-2015

This hotfix solves a problem when adding baseflow contribution to the load calculation in the MIKE HYDRO Basin, LOAD calculator tool.

845 KB
MIKE Zero hotfix 05-11-2015

This hotfix fixes an instability in Kinematic Wave (Model B) runoff model for large time steps.

938 KB
MIKE URBAN hotfix 05-11-2015

This hotfix fixes an instability in Kinematic Wave (Model B) runoff model for large time steps.

915 KB
MIKE URBAN hotfix 23-10-2015

This hotfix solves a MOUSE Advection Dispersion error in which the calculating grid points running AD hot start simulations do not match with the model network. The MOUSE code engine is modified.

4.6 MB
MIKE HYDRO hotfix 16-10-2015

This hotfix solves a problem with wrong output specification of data type and unit of computed load in the MIKE HYDRO Load Calculator tool.

844 KB
MIKE Zero hotfix 16-10-2015

This hotfix solves a problem with access violation in the 'dfsTSBridge.dll' time series bridge.

18.4 MB
MIKE URBAN hotfix 30-09-2015

This hotfix ensures that water levels are initialised individually for each PST before static volume calculations in MOUSE, and solves a problem in 32 bit MOUSE when using a very large number of catchments.

7 MB
MIKE HYDRO hotfix 23-09-2015

MIKE HYDRO Basin. This hotfix includes a correction for Data Assimilation where reservoir water levels was not correctly updated.

1.8 MB
MIKE URBAN hotfix 23-09-2015

This hotfix ensures that SWMM5 DWF loads are correctly transferred to MOUSE Network Loads table in scenario management.

810 KB
MIKE SHE hotfix 21-09-2015

This hotfix solves a problem where MIKE SHE terminates with a time step error. The error message in the log file will be similar to one of the messages shown below:

  • 'Program error: calling MsheDetailedTSOutput_Write1D more than once within a timestep for datatype: 17'
  • 'PROGRAM ERROR : Invalid output time for storing item no. 1 : 1536.00000000000'
  • 'msheExtraResultfileReaditemRl: no output at 3584. hours for datatype: 214006'
17.5 MB
MIKE 3 hotfix 11-09-2015

MIKE 3 Flow Model requires this hotfix to be installed to ensure a proper handling of a hot-started setup using source/sinks.

1.2 MB
WSWAT hotfix 10-09-2015

This hotfix is required when analysing 2D result files with the WS Digital Filtering Tool.

3.8 MB
MIKE URBAN hotfix 07-09-2015

This hotfix addresses an issue with reporting pump levels when water reaches a critical level.

4.6 MB
MIKE URBAN Hotfix 06-08-2015

This hotfix solves a crashing problem while geocoding load allocation points by means of selection of features.

0.8 MB
LITPACK Hotfix 30-07-2015
  • This hotfix corrects an error where the input parameter ‘extension_of_active_transport’ was not handled correctly by the input editor
1.3 MB
MIKE 21C hotfix 24-07-2015
  • Fixed an issue that deactivated the "Edit polylines" menu item
  • Fixed an issue that deactivated the "Hide all"/"Show all" polylines menu item
1.6 MB
MIKE SHE hotfix 10-07-2015

This hotfix introduces an option for the particle tracking in MIKE SHE so that particles are not allowed to enter UZ sinks. To activate this option, please specify the Boolean parameter 'DISABLE UZ PT SINK' in the extra parameter dialog.

6.56 MB
MIKE Zero hotfix 30-06-2015

This hotfix solves a problem in Grid Series Editor occurring when creating a DFS2 file from a DFSU file defined by large coordinate values.

4.5 MB
MIKE HYDRO hotfix 22-06-2015

This hotfix fixes an issue in MIKE HYDRO with generating cross sections from survey points when the cross section trajectory would intersect with the river multiple times.

3.4 MB
MIKE 11 hotfix 22-06-2015

The hotfix solves a problem with results from AD-simulations for models containing link-channels.

9.6 MB
MIKE SHE hotfix 18-06-2015

This hotfix solves a problem in MIKE SHE particle tracking where the 'Avoid initial placement of particles above the water table' is not working.

6.56 MB
MIKE 21C hotfix 17-06-2015

This hotfix increases the maximum number of sediment fractions allowed in a model from 16 to 32.

4.76 MB
MIKE Zero hotfix 09-06-2015

This hotfix resolves a problem with ABM particle mass budget results when running ECO Lab templates with more than one particle class.

29.8 MB
MIKE 21 hotfix 22-05-2015

This hotfix fixes an issue related to infiltration in the GPU version of MIKE 21 Flow Model FM.

18.7 MB
MIKE Zero hotfix 07-05-2015

This hotfix fixes an issue in MIKE View with viewing link flow based on MUS selection files.

3.22 MB
MIKE URBAN hotfix 07-05-2015

This hotfix fixes an issue in MIKE View with viewing link flow based on MUS selection files.

3.2 MB
MIKE Zero hotfix 06-05-2015

MIKE 21 Flow Model requires this hotfix to be installed to ensure proper handling of the connected source-sink.

4.95 MB
MIKE Zero hotfix 28-04-2015

This hotfix resolves a problem where the Usage tab in DHI License Administration is not available.

853 KB
MIKE URBAN hotfix 28-04-2015

This hotfix resolves a problem where the Usage tab in DHI License Administration is not available.

832 KB
WEST hotfix 28-04-2015

This hotfix resolves a problem where the Usage tab in DHI License Administration is not available.

832 KB
MIKE FLOOD hotfix 13-04-2015

This hotfix resolves a problem when coupling MIKE URBAN and MIKE 21 FM through MIKE FLOOD. ‘Link is outside domain’ warnings followed by ‘Abnormal run completion’ caused by problems in coupling nodes to mesh elements in coupling.

16.6 MB
MIKE Zero hotfix 24-03-2015

This hotfix resolves an issue in Mesh Generator concerning invalid polygons imported from xyz files. A new static marker identifying invalid polygons has been included to improve functionality.

1.95 MB
MIKE 21 hotfix 26-02-2015

This hotfix solves an issue with bank erosion in ST FM where the layer thickness was not being considered.

54.8 MB
MIKE URBAN hotfix 23-02-2015

This hotfix corrects an error when controlling an Orifice with a Gate, where the gate position has no effect on the flow through the orifice.

1 MB
MIKE Zero hotfix 18-02-2015

This hotfix resolves a problem with IF-THEN-ELSE statement introduced with the latest service pack/ECO Lab hotfix. Due to the error equation factors after an IF-THEN-ELSE were neglected, i.e. expressions like “IF( A > B, 1, 2) * 10” are just evaluated to result in 1 or 2 instead of 10 or 20. If the expression is written “10 * IF( A > B, 1, 2)” the result would be correct.

3.4 MB
MIKE Zero hotfix 12-02-2015

This hotfix is required for modelling culverts and weirs in inland applications. The hotfix offers some options with regard to flow distribution behind a structure.

54.8 MB

Hotfixes for release 2014 (require Service Pack 2 installed)

MIKE HYDRO hotfix 16-01-2015

This hotfix fixes a problem when running the MIKE HYDRO Basin engine programmatically in 64 bit (and it is needed to run MIKE HYDRO Basin from MIKE CUSTOMISED by DHI).

1.1 MB
MIKE Zero hotfix 12-01-2015

This hotfix solves an issue with very long response times when manipulating raw data and background data in the Bathymetry Editor.

1.1 MB
MIKE 11 hotfix 12-01-2015

This hotfix solves a problem with illegal operation during simulations with Graded Sediment Transport in combination with local definitions of non-scouring levels.

5.1 MB
MIKE 21 hotfix 08-01-2015

This hotfix solves an issue with 'Illegal storage access' when using time series data in the MIKE 21 Toolbox tool 'Generate Wave Energy Spectrum'.

1 MB
MIKE Zero hotfix 22-12-2014

This hotfix solves an issue for the MIKE to Google Earth tool with unwanted black borders around the image.

1.3 MB
MIKE URBAN hotfix 17-12-2014

This hotfix solves an issue in the MIKE 1D engine related to reading local parameters for the T-A Curve (A) runoff model type and disabling of RDI calculations on individual catchments for RDI+A simulation.

1.1 MB
MIKE 11 hotfix 17-12-2014 (b)

This hotfix solves an issue for MIKE 11, the MIKE 1D engine, when functions based on date/time are used in ECO Lab.

1.1 MB
MIKE 11 hotfix 17-12-2014

This hotfix solves an issue in the MIKE 1D engine related to irrigation in the NAM Catchment model.

991 KB
MIKE FLOOD (MIKE URBAN) hotfix 10-12-2014

This hotfix enables support for QD profiles (discharge as a function of depth) in couplings between MOUSE and MIKE 21. The new coupling type is accessible from the MIKE FLOOD interface.

Please note: If both MIKE URBAN and MIKE Zero are installed, then both hotfixes (MIKEURBAN_2014_141210.zip and MIKEZero_2014_141210b.zip) must be installed.

5.6 MB
MIKE FLOOD (MIKE Zero) hotfix 10-12-2014

This hotfix enables support for QD profiles (discharge as a function of depth) in couplings between MOUSE and MIKE 21. The new coupling type is accessible from the MIKE FLOOD interface.

Please note: If both MIKE URBAN and MIKE Zero are installed, then both hotfixes (MIKEURBAN_2014_141210.zip and MIKEZero_2014_141210b.zip) must be installed.

6.2 MB
MIKE 21 FM & MIKE 3 FM hotfix 10-12-2014

This hotfix resolves a problem with particle tracking where single particles could disappear from a simulation when using MPI parallelization. Under rare circumstances particles could be marked as “lost on boundary” when moved from one MPI subdomain to another.

54.8 MB
MIKE URBAN Hotfix 03-12-2014

This hotfix provides support for Pump Emergency Storage Estimation in the MOUSE engine.

7.7 MB
MIKE URBAN Hotfix 26-11-2014

This hotfix removes the limitation of max four rows in RTC Conditions tables for logical tests.

4.6 MB
MIKE Zero hotfix 26-11-2014

This hotfix resolves potential problems in ECO Lab templates with nested IF-THEN-ELSE statements if more than two nesting levels are present, i.e. if you use expressions like “IF (A==B, IF(C==D, IF(E==F, 1, 0), 0), 0). In particular the last, outermost “else” expression could be invoked as a result of the inner conditions. None of DHI’s standard templates are affected and the problem is only relevant if you are developing or modifying templates. Additionally, this hotfix removes the limit of max 6 nesting levels.

3.5 MB
MIKE View (MIKE Zero) hotfix 19-11-2014

This hotfix prints structure names as part of the legends in MIKE View so that multiple structures in the same location can be distinguished.

3.2 MB
MIKE View (MIKE URBAN) hotfix 19-11-2014

This hotfix prints structure names as part of the legends in MIKE View so that multiple structures in the same location can be distinguished.

3.2 MB
MIKE URBAN Hotfix 18-11-2014 (b)

This hotfix removes an issue from certain large 3-way couplings between MOUSE, MIKE 11 and MIKE 21.

3.2 MB
MIKE URBAN Hotfix 18-11-2014

This hotfix adjusts the MIKE URBAN license check cycle to better handle interruptions in network service.

2.3 MB
MIKE URBAN Hotfix 05-11-2014

The hotfix ensures that the Water Hammer module creates air chamber results.

1 MB
MIKE View (MIKE URBAN) hotfix 15-10-2014

This hotfix ensures that MIKE 11 additional result files with structures in US units can be loaded.

957 KB
MIKE View (MIKE Zero) hotfix 15-10-2014

This hotfix ensures that MIKE 11 additional result files with structures in US units can be loaded.

979 KB
MIKE 11 hotfix 15-10-2014

This hotfix ensures that MIKE 11 controls structures works for gate level sensor are connected to different source structures.

1 MB
MIKE 21/3 Coupled Model FM hotfix 13-10-2014

This hotfix corrects an MPI exchange error in the Spectral Wave model. The error could occur in cases where the Coupled Model FM was applied using the combination of the Hydrodynamic module and the Spectral Wave module together with the Sand Transport module using morphological feedback and varying layer thickness.

18.1 MB
MIKE URBAN Hotfix 10-10-2014

This hotfix makes sure that the Catchment Connection wizard can handle tables with non-regular OBJECTID fields.

1 MB
MIKE URBAN Hotfix 08-10-2014

This hotfix provides an added option to attach load points to nodes inside the containing catchment.

1 MB
MIKE SHE Hotfix 08-10-2014

This hotfix solves an issue related to Time Varying OL Manning Number. The specified Detention Storage was not used in the WM simulation in this case, and a WQ simulation with OL included would stop with an error message.

28.2 MB
MIKE HYDRO Hotfix 03-10-2014

This fixes wrong source rates in MIKE HYDRO Basin for water quality calculations (WQ module) and problems when WQ is run in combination with groundwater.

1.8 MB
MIKE Zero Hotfix 02-10-2014

This hotfix is required to run MIKE Zero in other languages than English.

7.9 MB
MIKE URBAN Hotfix 02-10-2014

This hotfix ensures that minimum pressure for WD tanks is calculated in statistics.

989 KB
MIKE 21 FM & MIKE 3 FM Hotfix 25-09-2014

A bug have been fixed relating to the use of spatial varying diffusion coefficient when the diffusion coefficient formulation is applied in the Temperature and Salinity module, and to the use of spatial varying dispersion coefficients when the dispersion coefficient formulation is applied in the Transport module, Sand transport module, Mud transport module, ECO Lab module and the Particle Track module.

54.7 MB
MIKE FLOOD Hotfix 25-09-2014

This hotfix is required when modelling lateral links in MIKE FLOOD.

5.2 MB
MIKE View (MIKE URBAN) Hotfix 23-09-2014

This hotfix adds ability to load DFS2 files to MIKE View.

3.2 MB
MIKE View (MIKE Zero) Hotfix 23-09-2014

This hotfix adds ability to load DFS2 files to MIKE View.

3.2 MB
MIKE URBAN Hotfix 19-09-2014

This hotfix updates French layer names so that Catchment Processing works

967 KB
MIKE 21/3 Hotfix 16-09-2014

This hotfix corrects an error in MIKE 21/3 Particle Tracking and MIKE 21/3 Oil Spill related to a possible crash in the initialisation of sources. Additionally, it fixes an error in MIKE 21/3 Oil Spill that in rare cases could cause the calculation of particle movement to crash.

9 MB
MIKE HYDRO Hotfix 16-09-2014

Extraction of cross sections from DEM or survey points does not give correct results in case of 'negative flow direction' branches

3.3 MB

Hotfixes for Release 2014 (require Service Pack 1 installed)

MIKE 21/3 Hotfix 17-07-2014

This hotfix corrects some problems in MIKE 21/3 PT particle tracking regarding elements with only one layer of water. Additionally, it fixes an error seen with certain license options.

4.8 MB
MIKE URBAN Hotfix 17-07-2014

This hotfix fixes a problem with shuffled icons in toolbars and menus.

2.3 MB
MIKE SHE Hotfix 09-07-2014

This hotfix is required for AD coupling with MIKE SHE

16.3 MB
MIKE 11 Hotfix 17-06-2014

This hot-fix is required when using the Ashida & Michiue transport model in the sediment transport module.

16.8 MB
MIKE URBAN Hotfix 12-06-2014

Two issues have been fixed: MergeERF can now handle very large files, and the generation of the joblist in LTS-module can handle dry weather flow when implemented via catchment load.

5.1 MB
MIKE 21 Hotfix 11-06-2014

If flood & drying occurs in an MIKE 21 ECO Lab simulation the values for not transported state variables (fixed, scope SED, WB) of re-flooded cells can be wrong.

4.9 MB
MIKE URBAN Hotfix 03-06-2014

Fixes an issue where the ‘Wash-off exponent’ from ‘SRQ Main Parameters’ was not correctly read by the MOUSE engine in Runoff Model C.

3.2 MB
MIKE URBAN Hotfix 26-05-2014

This hotfix addresses an issue where the database is sometimes locked after import, and a backup file cannot be created.

1.7 MB
MIKE URBAN Hotfix 19-05-2014

This hotfix is required to generate catchment connection when using the Catchment connection wizard. It also solves an issue when Importing using ‘Restore from simple .xml’ option.

1.1 MB
MIKE URBAN Hotfix 05-05-2014

This hotfix addresses a problem in the calculation of some derived results.

0.8 MB
MIKE URBAN Hotfix 30-04-2014

This hotfix is required to copy Catchment connections table to clipboard.

3.1 MB
MIKE URBAN Hotfix 29-04-2014

This hotfix addresses a problem in the Model Configuration tool. The setting “Apply Current” in the conflicts dialog was sometimes not used.

0.9 MB

Hotfixes for Release 2014 (no Service Pack required)

MIKE 3 Hotfix 16-01-2014

This hot-fix is required for MIKE 3 FM when the TS (Temperature and Salinity) module is included

24.9 MB
MIKE C-MAP Hotfix 22-01-2014

This hotfix addresses a problem of the license system memory consumption causing crashes when used very intensively, such as for operational systems.

0.8 MB
MIKE FLOOD Hotfix 17-03-2014

After conversion of a Cartesian MIKE 21 model set-up to a Flexible Mesh set-up this hot-fix is needed to run a MIKE FLOOD FM simulation.

16.8 MB
MIKE SHE Hotfix 25-02-2014

This hot-fix solves an issue in the UZ Richards solver in a WM simulation: Crash due to division by zero when the conductivity is zero. This will normally only happen in a very unstable model.

6.6 MB
MIKE URBAN Hotfix 12-02-2014

Fixes an issue where using selection files would select random nodes when node IDs in the selection file do not exist.

2.3 MB
MIKE URBAN Hotfix 10-02-2014

m11extraWin: this hotfix ensures that command line arguments for Additional parameters are handled correctly.

0.8 MB
MIKE URBAN Hotfix 23-01-2014

This hotfix is required to regenerate the Load allocations and Demand allocations connections. It also addresses a problem where the ‘Digitize rectangle’ functionality will cause a crash.

0.8 MB
MIKE URBAN Hotfix 22-01-2014

This hotfix addresses a problem of the license system memory consumption causing crashes when used very intensively, such as for operational systems.

0.8 MB
MIKE URBAN Hotfix 21-01-2014

This fix removes a license check in the MIKE 1D control module if only MIKE URBAN LinkRegulation and WellSetPoint are used.

1.0 MB
MIKE URBAN Hotfix 16-01-2014

This hotfix is required to add a dfs2-file in ArcMap.

0.8 MB
MIKE VIEW (MIKE URBAN) Hotfix 21-01-2014

This fix ensures that .ERF files can be loaded in MIKE View.

3.1 MB
MIKE VIEW (MIKE ZERO) Hotfix 21-01-2014

This fix ensures that .ERF files can be loaded in MIKE View.

3.1 MB
MIKE ZERO Hotfix 22-01-2014

This hotfix addresses a problem of the license system memory consumption causing crashes when used very intensively, such as for operational systems.

0.8 MB
MIKE ZERO Hotfix 13-01-2014

This hot-fix is required for using classic LITPACK modules (LITLINE/LITTREN/LITPROF), the Statistic tools in MIKE Zero Toolbox and the MIKE 3 Digitization tool.

2.3 MB
WEST Hotfix 22-01-2014

This hotfix addresses a problem of the license system memory consumption causing crashes when used very intensively, such as for operational systems.

0.8 MB